Monday, September 15, 2014

Why is My Cooling System Not Cooling



The cooling system is a complex machine intended to condition your home's air. Notwithstanding cooling the home the ventilating framework likewise removes the humidity in the air air which makes the solace temperature of the home significantly more agreeable. There are numerous framework segments that are included in ventilating a home or business building. In this article we will head over a percentage of the segments that help chill off your home.

The primary part of a cooling system is the compressor. Think about the compressor as the heart of the ventilating framework which pumps refrigerant through the supply routes or line sets bringing about the assimilation of hotness. The compressor must be assembled to withstand high head pressure and have the capacity to cycle on and off  commonly. At the point when the compressor goes terrible the compressor must be totally supplanted unless the compressor is a semi-hermetic compressor for larger applications just, however much of the time particularly for family homes compressors must be supplanted which might be immoderate relying upon the sort of compressor that your ac system may utilize. The most well-known compressor failure is known as a short to ground. This failure is the point at which the inside windings short or touch the shell packaging of the compressor bringing about a short to ground and no cooling.

An alternate segment of the cooling system is known as the evaporator coil. This coil is additionally called the cooling coil because of the area and what it does when cooling your home's air. The evaporator coil works by the utilization of a metering gadget spritzing low measures of refrigerant into the  evaporator coil or low side of the system. Since the evaporator coil is at a low pressure the refrigerant vaporizes rapidly and retains heat. This high temperature retention is the thing that conditions the air as it passes over the evaporator coil bringing about a temperature distinction between the return air and the supply air and cooling the home to the property holders coveted setpoint. The most widely recognized issue with the evaporator coil is rusting. Since the cooling system helps dehumidify the indoor air bunches of water buildup develops on the evaporator coil bringing about rust which causes rust holes on the evaporator coil itself. This brings about pinholes that release refrigerant and lessen the systems refrigerant charge to drop beneath working norms. A typical sign that beyond any doubt refrigerant is low is a no cooling and the evaporator coil may be solidified.

The condenser is an alternate significant segment of the heating and cooling system. The condenser is in charge of changing the vapor refrigerant over to a fluid structure by cooling it. At the point when the refrigerant is returned once more to a high pressure the refrigerant starts to change state again to fluid manifestation and the condenser helps it prepare by reducing it temperate. Much the same as the evaporator coil the condenser coil may start to demonstrate the pinhole problem also bringing about loss of refrigerant charge in the system. Furthermore a typical issue may be the condenser is caked with debris bringing about no cooling and putting the compressor in a non operational state because of higher than ordinary pressure.

There are less difficult issues that may be grinding away also indoor regulators, capacitors, contactors and even blown wires can be an issue that causes the cooling system to need repair. Ac repair San Antonio must be carried out by a guaranteed and prepared person that comprehends these complex machines. It is not suggested that an untrained individual or persons endeavor to repair any HVAC
equipment.





Our sponsors San Antonio
Our Blog
Air Duct Cleaning